10 Best Dual Color 3d Printer | Top Listed By Experts

If you are looking for Best Dual Color 3d Printer
You are in the right place. Our Experts made a top 10 list for you. Take a look –

We found thousand of reviews when researching. We have considered users feedback on the Best Best Dual Color 3d Printer
and Our suggestion includes only the finest of them in this articles.

10 Best Dual Color 3d Printer

SaleTop Pick. 1
iSANMATE 3D Printer Filament, PLA Filament 1.75mm Dual Color Silk PLA, Silk Gold Red 3D Printing...
  • ✨【Pla Filament Shimmering Colours】- Unique colour change effect will make you get a magic model and attract everyone's attention;
  • ✨【Premium PLA +】- iSANMATE 3d filament without warping, clog-free, bubble-free and easy-to-use, smooth and delicate, less entanglement by machine winding, no tangling and easy to feed. with excellent layer adhesion, and easy support removal, and works perfectly with most FDM 3d printers on the market;
  • ✨【Recommended Printing Conditions】- The Printing Temp is 195°C-225°C (depending on the printer model)which is wider than typical PLA, Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C;
Top Pick. 2
Sovol SV02 3D Printer with All-Metal Dual Extruder, Silent Board TMC2208 Drive, Meanwell Power...
  • 【95% Pre-assembled with Upgraded 2 in 1 Out Hotend】 With a full-metal body, stable and durable. 95% preassembled already, just need to install the gantry, filament holder and the touchscreen effortlessly and get ready within 5~10 minutes. Support two-color printing, switch between two filaments when printing, and extrude through a nozzle. Provides high speed and stable print quality. Larger Build volume (mm) 280 x 240 x 300 (one color), 240 x 220 x 300 (two colors).
  • 【External Laser Engraving Module】 Sovol SV01/SV02 3D printer can be used with laser kits (not included) to expand the laser engraving function. Please purchase it according to your needs. Supports engraving with a wide variety of materials like wood, plastic, leather, PVC, paper, resin, etc.
  • 【Silent Motherboard TMC2208 & Meanwell Power Supply】 Works more quietly, provides excellent stability and protection for SV02. Marlin 2.0 firmware and bootloader preinstalled. With safety warning system of Thermal Runaway Protection, against lose control of temperature. A stable and sufficient power supply protects your printer from unexpected voltage peaks. Safer and more reliable.
Top Pick. 3
IEMAI PLA 3D Printer Filament, PLA Filament 1.75mm Dual Color Filament Gold Red Silk Shiny Metallic...
  • [PLA Filament Dual Filament] 🍎 The pla filament combine metallic gold and silk red, color change from different angles , tunning color. The amazing visual effect created by the unique surface illusion color technology of IEMAI .
  • [Magic Filament] 🍎 From different angles, the model which printed by the dual color filament shows amazing color changing. From our video, you can see the color change more clearly. ( NOTE: different model/sample/ object you print , the color change effect is different.)
  • [Silk Filament ] 🍎 IEMAI PLA 3D Printer Filament offers good shaping, strong toughness, no bubble formation, no jamming, no warping, melt well, convey evenly and evenly without clogging the nozzle or the extruder. Silk filament has amazing metallic color, excellent silk glossy smooth appearance.
Top Pick. 4
Flashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Touchscreen W/2 Spool Fully Enclosed...
  • Dual extruder – Support dual color print and dual material print.Flashforge Dreamer make it come true that more complicated prints can be printed perfectly
  • Heating bed – Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
  • Intelligent leveling – Dreamer features an intuitive calibration detection system to assist leveling. you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise
Top Pick. 5
YOUSU Silk PLA Dual Color 3D Printer Filament, PLA Filament 1.75mm(± 0.03 mm) 20m Sample Pack,...
  • [1.75mm Silk PLA filament ] Yousu dichromatic PLA filament, two color in the same filament. Perfect filament winding that compatible with the most FDM 3D printers.
  • [Shiny PLA filament] - Without polishing, you can get pearlescent & gorgeous printing surface. Unique based recipe assures less stringing and better overhang performance.
  • [No warping & Good Layer Bonding] - Excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. Good layer bonding strength make the printing parts stronger.
Top Pick. 6
BIBO 3D Printer Dual Extruder Sturdy Frame WiFi Touch Screen Cut Printing Time in Half Filament...
  • Full Color Touch Screen: with no threshold,which is more friendly and easier operation
  • Dual Extruder: allows you print the object in two color and print the dissolvable filament for printing support material
  • Filament detection: if the filament spool runs out during printing, the machine automatically pauses for you to load in a fresh spool, very useful for big volume object printing
Top Pick. 7
3D Printer 3 in 1 Out Multi-Color Extruder Three Colors Switching Hotend Compatible with Titan...
  • Filament Size: 1.75mm; nozzle size: 0.4mm; heater wire: 12V/ 40W; Thermistor:100K NTC 3950, main heat sink block 60*27*27mm
  • This extruder kit can be used as single color filament printing, dual colors filament printing or 3 colors filament switching printing, but not for mixing colors
  • Bowden feeding, Compatible with Bulldog, Titan or other types of Bowden extruder (Bulldog extruder is recommended)
Top Pick. 8
BIGTREETECH 3D Printer Part 2 in 1 Out Hotend Multi Color Dual Bowden Extruder Full Kit with...
  • Select high-quality Aluminum alloy 6063 material,and use refined sandblasting oxidation treatment of product shell to improve the surface texture
  • The heat dissipation efficiency is increased to 40% compared with the existing similar products which can effectively reduce and avoid the occurrence of the throat plug
  • The weight of the Nozzle is at least 20-30% lighter than that of the same type Of the products and the printing accuracy and printing quality can be effectively improved
Top Pick. 9
BIGTREETECH 3D Printer Part 2 in 1 Out Hotend Multi Color Dual Bowden Extruder Full Kit with...
  • Select high-quality Aluminum alloy 6063 material,and use refined sandblasting oxidation treatment of product shell to improve the surface texture
  • The heat dissipation efficiency is increased to 40% compared with the existing similar products which can effectively reduce and avoid the occurrence of the throat plug
  • The weight of the Nozzle is at least 20-30% lighter than that of the same type Of the products and the printing accuracy and printing quality can be effectively improved
Top Pick. 10
WYZworks PLA 1.75mm 2 Colors/Dual (Purple & Violet) Premium 3D Printer Filament - Dimensional...
  • TWO COLORS: Total of 1kg (2.2lbs) - 500g (1.1lbs) of each color
  • Thermoplastic Polylactic Acid (PLA - MSDS Approved) 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) 1 KG (2.20 lbs) Comes Vacuumed Sealed.
  • Recommended Printing Temperature Range 210°C - 240°C
Top Pick. 12
LNL - Tenlog TL-D3 Pro Dual Extruder 3D Printer - 300 Degree High Temperature Nozzle,Silent...
  • 💥 EACH MACHINE Has Been Fully Tested at Our U.S. Based Warehouse to eliminate the chance of damage during overseas transit. This ensures you’ll spend more time printing and less time troubleshooting. If you do have a problem, our full time regional staff will always be here to help.
  • 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Upgrade Borosilicate Glass Bed】Upgraded borosilicate glass bed enables prints to adhere better without warping. After the bed cools, models will pop-off with little to no resistance, leaving a smooth finish.

Leave a Comment

Your email address will not be published.